chkntfs (用NTFS显示或修改对磁盘驱动器的检查)

舞夕之发表于 2020-06-29 12:02

浏览次数：

在手机上阅读

释放双眼，带上耳机，听听看~！

00:00

chkntfs命令用于在启动时显示或修改使用NTFS对磁盘驱动器的检查。

查看英文版

1 chkntfs 运行系统环境

2 chkntfs 语法

3 chkntfs 示例

Windows xp

Windows vista

Windows 2000

Windows 7

Windows 8

Windows 10

Windows NT

在启动时显示或修改磁盘检查。

CHKNTFS volume [...]
CHKNTFS /D
CHKNTFS /T[:time]
CHKNTFS /X volume [...]
CHKNTFS /C volume [...]

volume	指定驱动器号（后跟冒号），安装点或卷名。
/ D	将计算机恢复为默认行为；在启动时检查所有驱动器，并在脏的磁盘上运行chkdsk。
/ T：time	将AUTOCHK初始化倒计时时间更改为指定的时间量（以秒为单位）。如果未指定时间，则显示当前设置。
/X	从默认的启动时间检查中排除驱动器。被排除的驱动器不会在命令调用之间累积。
/C	计划在启动时检查驱动器；如果驱动器已损坏，则运行chkdsk。

如果未指定任何开关，则CHKNTFS将显示指定的驱动器是否脏了或计划在下次重新引导时进行检查。

Displays or modifies the checking of disk at boot time.

CHKNTFS volume [...]
CHKNTFS /D
CHKNTFS /T[:time]
CHKNTFS /X volume [...]
CHKNTFS /C volume [...]

volume	Specifies the drive letter (followed by a colon), mount point, or volume name.
/D	Restores the machine to the default behavior; all drives are checked at boot time and chkdsk is run on those that are dirty.
/T:time	Changes the AUTOCHK initiation count down time to the specified amount of time in seconds. If time is not specified, displays the current setting.
/X	Excludes a drive from the default boot-time check. Excluded drives are not accumulated between command invocations.
/C	Schedules a drive to be checked at boot time; chkdsk runs if the drive is dirty.

If no switches are specified, CHKNTFS displays if the specified drive is dirty or scheduled to be checked on next reboot.

查看英文版

chkntfs /d

将计算机还原回默认设置，如果所有驱动器都损坏了，则在启动时检查它们。

chkntfs /d

Restores the computer back to the default settings and all drives are checked at boot if they are dirty.

查看英文版

如此好文，分享给朋友